Public Attributes
character(1024)	inputfile
	Name of the input file [-].

logical	linearize = .FALSE.
	Flag that tells this module if the glue code wants to linearize. More...

integer(intki)	numbl
	Number of blades on the turbine [-].

character(1024)	rootname
	RootName for writing output files [-].

real(reki), dimension(:), allocatable	blpitchinit
	Initial blade pitch [-].

real(reki)	gravity
	Gravitational acceleration [m/s^2].

real(reki), dimension(1:3)	r_n_o_g
	nacelle origin for setting up mesh [m]

real(reki), dimension(1:3)	r_twrbase
	tower base origin for setting up mesh [m]

real(dbki)	tmax
	max time from glue code [s]

real(reki)	avgwindspeed
	average wind speed for the simulation [m/s]

real(reki)	airdens
	air density [kg/m^3]

integer(intki)	numsc2ctrl
	number of controller inputs [from supercontroller] [-]

integer(intki)	numctrl2sc
	number of controller outputs [to supercontroller] [-]

integer(intki)	trimcase
	Controller parameter to be trimmed {1:yaw; 2:torque; 3:pitch} [used only if CalcSteady=True] [-].

real(reki)	trimgain
	Proportional gain for the rotational speed error (>0) [used only if TrimCase>0] [rad/(rad/s) for yaw or pitch; Nm/(rad/s) for torque].

real(reki)	rotspeedref
	Reference rotor speed [rad/s].

Member Data Documentation

◆ linearize

logical servodyn_types::srvd_initinputtype::linearize = .FALSE.

Flag that tells this module if the glue code wants to linearize.

[-]

The documentation for this type was generated from the following file: