 |
OpenFAST
Wind turbine multiphysics simulator
|
|
OpenFAST
Wind turbine multiphysics simulator
|
Public Attributes | |
| type(bemt_miscvartype) | bemt |
| MiscVars from the BEMT module [-]. | |
| type(bemt_outputtype) | bemt_y |
| Outputs from the BEMT module [-]. | |
| type(bemt_inputtype), dimension(1:2) | bemt_u |
| Inputs to the BEMT module [-]. | |
| type(aa_miscvartype) | aa |
| MiscVars from the AA module [-]. | |
| type(aa_outputtype) | aa_y |
| Outputs from the AA module [-]. | |
| type(aa_inputtype) | aa_u |
| Inputs to the AA module [-]. | |
| real(reki), dimension(:,:,:), allocatable | disturbedinflow |
| InflowOnBlade values modified by tower influence [m/s]. | |
| real(r8ki), dimension(:,:,:,:), allocatable | orientationannulus |
| Coordinate system equivalent to BladeMotion Orientation, but without live sweep, blade-pitch, and twist angles [-]. | |
| real(reki), dimension(:), allocatable | allouts |
| An array holding the value of all of the calculated (not only selected) output channels [-]. | |
| real(reki), dimension(:), allocatable | w_twr |
| relative wind speed normal to the tower at node j [m/s] | |
| real(reki), dimension(:), allocatable | x_twr |
| local x-component of force per unit length of the jth node in the tower [m/s] | |
| real(reki), dimension(:), allocatable | y_twr |
| local y-component of force per unit length of the jth node in the tower [m/s] | |
| real(reki), dimension(:,:), allocatable | curve |
| curvature angle, saved for possible output to file [rad] | |
| real(reki), dimension(:,:), allocatable | twrclrnc |
| Distance between tower (including tower radius) and blade node (not including blade width), saved for possible output to file [m]. | |
| real(reki), dimension(:,:), allocatable | x |
| normal force per unit length (normal to the plane, not chord) of the jth node in the kth blade [N/m] | |
| real(reki), dimension(:,:), allocatable | y |
| tangential force per unit length (tangential to the plane, not chord) of the jth node in the kth blade [N/m] | |
| real(reki), dimension(:,:), allocatable | z |
| axial force per unit length (tangential to the plane, not chord) of the jth node in the kth blade [N/m] | |
| real(reki), dimension(:,:), allocatable | m |
| pitching moment per unit length of the jth node in the kth blade [Nm/m] | |
| real(reki), dimension(:,:), allocatable | mx |
| pitching moment per unit length of the jth node in the kth blade (in x direction) [Nm/m] | |
| real(reki), dimension(:,:), allocatable | my |
| pitching moment per unit length of the jth node in the kth blade (in y direction) [Nm/m] | |
| real(reki), dimension(:,:), allocatable | mz |
| pitching moment per unit length of the jth node in the kth blade (in z direction) [Nm/m] | |
| real(reki), dimension(1:3) | v_diskavg |
| disk-average relative wind speed [m/s] | |
| real(reki) | yaw |
| Yaw calculated in SetInputsForBEMT [rad]. | |
| real(reki) | tilt |
| tilt calculated in SetInputsForBEMT [rad] | |
| real(reki), dimension(:), allocatable | hub_theta_x_root |
| angles saved for FAST.Farm [rad] | |
| real(reki) | v_dot_x |
| type(meshtype) | hubload |
| mesh at hub; used to compute an integral for mapping the output blade loads to a single point (for writing to file only) [-] | |
| type(meshmaptype), dimension(:), allocatable | b_l_2_h_p |
| mapping data structure to map each bladeLoad output mesh to the MiscVarHubLoad mesh [-] | |
| real(reki), dimension(:,:), allocatable | sigmacavitcrit |
| critical cavitation number- inception value (above which cavit will occur) [-] | |
| real(reki), dimension(:,:), allocatable | sigmacavit |
| cavitation number at node [-] | |
| logical, dimension(:,:), allocatable | cavitwarnset |
| cavitation warning issued [-] | |
| real(reki), dimension(:,:,:), allocatable | blfb |
| buoyant force per unit length at blade node [N/m] | |
| real(reki), dimension(:,:,:), allocatable | blmb |
| buoyant moment per unit length at blade node [Nm/m] | |
| real(reki), dimension(:,:), allocatable | twrfb |
| buoyant force per unit length at tower node [N/m] | |
| real(reki), dimension(:,:), allocatable | twrmb |
| buoyant moment per unit length at tower node [Nm/m] | |
| real(reki), dimension(:), allocatable | hubfb |
| buoyant force at hub node [N] | |
| real(reki), dimension(:), allocatable | hubmb |
| buoyant moment at hub node [Nm] | |
| real(reki), dimension(:), allocatable | nacfb |
| buoyant force at nacelle (tower top) node [N] | |
| real(reki), dimension(:), allocatable | nacmb |
| buoyant moment at nacelle (tower top) node [Nm] | |
| type(meshtype), dimension(:), allocatable | bladerootload |
| meshes at blade root; used to compute an integral for mapping the output blade loads to single points (for writing to file only) [-] | |
| type(meshmaptype), dimension(:), allocatable | b_l_2_r_p |
| mapping data structure to map each bladeLoad output mesh to corresponding MiscVarBladeRootLoad mesh [-] | |
| type(meshtype), dimension(:), allocatable | bladebuoyloadpoint |
| point mesh for lumped buoyant blade loads [-] | |
| type(meshtype), dimension(:), allocatable | bladebuoyload |
| line mesh for per unit length buoyant blade loads [-] | |
| type(meshmaptype), dimension(:), allocatable | b_p_2_b_l |
| mapping data structure to map buoyant blade point loads (mBladeBuoyLoadPoint) to buoyant blade line loads (mBladeBuoyLoad) [-] | |
| type(meshtype) | twrbuoyloadpoint |
| point mesh for lumped buoyant tower loads [-] | |
| type(meshtype) | twrbuoyload |
| line mesh for per unit length buoyant tower loads [-] | |
| type(meshmaptype) | t_p_2_t_l |
| mapping data structure to map buoyant tower point loads (mTwrBuoyLoadPoint) to buoyant tower line loads (mTwrBuoyLoad) [-] | |
| logical | firstwarn_towerstrike |
| flag to avoid printing tower strike multiple times [-] | |
| real(reki), dimension(1:3) | avgdiskvel |
| disk-averaged U,V,W [m/s] | |
| real(reki) | tfinalpha |
| Angle of attack for tailfin [-]. | |
| real(reki) | tfinre |
| Reynolds number for tailfin [-]. | |
| real(reki) | tfinvrel |
| Orthogonal relative velocity nrom at the reference point [-]. | |
| real(reki), dimension(1:3) | tfinvund_i |
| Undisturbed wind velocity at the reference point of the fin in the inertial system [-]. | |
| real(reki), dimension(1:3) | tfinvind_i |
| Induced velocity at the reference point of the fin in the inertial system [-]. | |
| real(reki), dimension(1:3) | tfinvrel_i |
| Relative velocity at the reference point of the fin in the inertial system [-]. | |
| real(reki), dimension(1:3) | tfinstv_i |
| Structural velocity at the reference point of the fin in the inertial system [-]. | |
| real(reki), dimension(1:3) | tfinf_i |
| Forces at the reference point of the fin in the inertial system [-]. | |
| real(reki), dimension(1:3) | tfinm_i |
| Moments at the reference point of the fin in the inertial system [-]. | |
1.8.13